Panasonic BM-ET330 - Manual (Page 15)

15
SPECIFICATIONS OF WIEGAND CONNECTORS (FOR CARD READER)
Port Name Pin No.
1
2
3
4
POWER
GND
DATA 0
DATA 1
OUT
–
IN
IN
Wiegand 5 V
Wiegand GND
Wiegand DATA 0
Wiegand DATA 1
5 V, 100 mA (Max)
0 V
0 V to 5 V, 24 mA (Max), Wiegand I/F
Active low
0 V to 5 V, 24 mA (Max), Wiegand I/F
Active low
I/O Signal Description Remarks
SPECIFICATIONS OF RS-485 CONNECTORS (FOR CARD READER)
Differential input: ± 0.2 V or more
Differential output: ± 2 V or more
(When termination is ON)
Port Name Pin No.
13 RS-485 (A) IN/OUT RS-485 (A)
14 RS-485 (B) IN/OUT RS-485 (B)
Differential input: ± 0.2 V or more
Differential output: ± 2 V or more
(When termination is ON)
I/O Signal Description Remarks
SPECIFICATIONS OF WIEGAND CONNECTORS (FOR ACCESS CONTROL PANEL)
5 V
0 V to 5 V, 24 mA (Max), Wiegand I/F
Active low,Pulse width: 200 ms or more
Port Name
ACCEPT-LED
POWER
GND
DATA 0
IN
IN*
–
OUT
Wiegand ACCEPT-LED
Wiegand 5 V
Wiegand GND
Wiegand DATA 0
0 V
I/O Signal Description Remarks Pin No.
5
6
7
8
DATA 1 OUT Wiegand DATA 1
0 V to 5 V, 24 mA (Max), Wiegand I/F
Active low
9
REJECT-LED IN Wiegand REJECT-LED
0 V to 5 V, 24 mA (Max), Wiegand I/F
Active low, Pulse width: 200 ms or more
10
0 V to 5 V, 24 mA (Max), Wiegand I/F
Active low
* This port is for wiring designation convenience only.
(A)
(B)
To the RS-485B
terminal of
RWK400
(A)
(B)
To the RS-485A
terminal of
RWK400