Panasonic BM-ET330 - Manual (Page 28)

28
■ How to Carry out Recognition
The following is how to control the iris reader when a user (you), whose iris data has been enrolled in the iris server, carries out
recognition. This document will explain about:
• Recognition by an iris reader only
• Recognition by an iris reader and a card reader
Notes:
• To carry out the recognition by an iris reader only, your iris data needs to have been sent to recognition iris readers,
enrolled in the iris server, or written into a card. If your iris data has not been enrolled, refer to system administrators for
enrollment.
• Depending on the settings by the system administrators, voice guidance (voice guidance and/or shutter sound) may not
be output.
● Recognition by an Iris Reader only
Stand (Sit down) in front of the iris reader.
Follow the directions by system administrators or operators. 1
Move your face so as your eyes are positioned within 50 cm
{1.64 ft.} from the iris reader.
• The voice guidance will say, "Please look into the mirror."
• The guide indicator or voice guidance will start.
2
Position your eyes in the mirror by referring to " How to Position Your Eyes in the Mirror" (pp. 23 to
25). 3
Move your position slowly by following the guide indicator or
voice guidance.
• When the distance between the iris reader and you is too great, the
voice guidance will say, "Please move a little closer."
• When the distance between the iris reader and you is too short, the
voice guidance will say, "Please move back a little."
• When your position is right-of-centre, the voice guidance will say,
"Please move to the left a little."
• When your position is left-of-centre, the voice guidance will say,
"Please move to the right a little."
During the guidance, the near-infrared light will blink.
Keep your eyes opened widely during the guidance.
4