Standard accessories – Panasonic BM-ET330 User Manual
Page 36
36
*
1
The third-party external power-supply should meet the following specifications.
Output voltage:
12 V DC/24 V AC, ±0.5 V
Output current capacity:
1.5 A or more (DC/AC)
Rated ripple voltage/Ripple noise:
150 mV [P-P] or less
Overcurrent protection:
Enabled (mandatory)
*
2
This iris reader supports auto negotiation. If you use a hub supporting auto sensing, connection may not be established
due to auto sensing malfunction.
*
3
The recognition time may differ depending on capturing conditions, network conditions, or the total number of enrolled
users.
*
4
User Licence Software BM-EU30000E Series (option) is required.
Operating Instructions (This document)....................................... 1 pc.
The following parts are used during installation procedures.
Mounting bracket ........................................................................ 1 pc.
Mounting screw (M5) ................................................................... 1 pc.
Front cover .................................................................................. 1 pc.
Tamperproof screw ...................................................................... 2 pcs.
Tamperproof screw driver tool ..................................................... 1 pc.
Clamping tool .............................................................................. 1 pc.
Clamping tool screw (M3) ........................................................... 1 pc.
Ferrite core ................................................................................... 1 pc.
STANDARD ACCESSORIES