Panasonic WV-NP304 - Manual (Page 16)

16
Mount the lens by rotating it clockwise slowly. Then, connect the lens cable to the ALC lens
connector of the camera.
Optional lens
Lens type Model no.
ALC lens for 1/3-inch type CCD cameras WV-LZA62/2
2x varifocal (high resolution)
Other lenses for 1/3 inch CCD cameras can be mounted on this camera. However, high resolu-
tion scanning of this camera may not be fully used for scanning of "1 280 x 960".It is recom-
mended to use a dedicated high-resolution lens when shooting a dark subject with the aperture
opened.
How to use a varifocal lens
The following are descriptions of how to adjust a 2x varifocal
lens. Method of adjustment may be different depending on
the lens in use. Refer to the operating instructions of the lens
in use for further information.
1. Loosen the zoom lock screw and rotate to the "T" end.
2. Set the focus ring to near the "F" end.
3. Focus on a subject which is located around 10 m away
or further to adjust the flange-back length using flange-
back adjustment ring.
Important:
• Check if it is possible to focus on a subject which is located around 1.2 m away by rotating
the focus ring while setting the zoom lock screw to the "W" end.
T
W
Flange-back adjustment ring
Zoom lock screw
Focus ring
ALC lens connector
Within ø20 mm
CS-mount: Less than 8 mm
w
F
N
W
T
q
Focus ring
Zoom lock screw
Lens mounting