Panasonic WV-NP304 - Manual (Page 21)

21
x
Attach the safety wire to the safety wire attachment hole.
q Pass the loop end of the safety wire through the safety wire attachment hole.
w Hook the loop end of the safety wire on the safety wire hook.
When installing on a wall
<Required camera mount bracket and safety wire kit>
• Camera mount bracket: WV-831
• Safety wire kit: WV-Q140
z
Attach the safety wire attachment bracket for wall mounting (provided) to the screw hole
for the camera mount bracket using the fixing screw (provided).
Important:
• Use the provided screw to attach the
safety wire attachment bracket for wall
mounting.
When a screw other than the removed
screw (with a different height) is used, it
may result in drop or damage of the
camera.
Recommended tightening torque: 0.39
N·m
T
W
Safety wire attachment hole
* Do not attach the
safety wire here.
Screw hole for the
camera mount
bracket
Fixing screw (provided)
Safety wire
attachment bracket
for wall mount
(provided)
Safety wire attachment hole
Safety wire
Safety wire hook