Pioneer DJm-909 - Manual (Page 16)

16
<DRB1349>
BPM COUNTING
Automatic Mode BPM Counting
This function automatically counts the track’s speed in BPM
(Beats Per Minute), displaying the results as a numerical
value. The functions does not merely count the bass beat,
but uses a computer to calculate the track’s original BPM
required by the DJ. The display provides a visual standard in
addition to the human ear, thus allowing the DJ to quickly
match two tracks possessing differing speeds.
When auto mode is used to count BPM, the calculated BPM
value is displayed on the LCD panel, allowing quick matching
of tracks with differing speeds. (Counting range: 70.0 to
180.0 BPM)
The display flashes during BPM counting.
* Some tracks may not be counted properly, in which case
manual count should be used.
(See page 11, top panel items 44, 51)
¶ The BPM value can be input directly by rotating
the TIME/SELECT dial while holding the TAP
button depressed.
7 Selecting Auto Mode
1. Press the FX ADJ. button to cause the touch
panel screen to display the effect parameter
adjust menu.
If the CH-1 FX ADJ. button is pressed, the CH-1 display
appears; if the CH-2 FX ADJ. button is pressed, the CH-2
display appears.
2. Press the BPM TAP button (displayed in manual
mode), to display the BPM AUTO button.
EDIT 1 CH
TIME
AUTO
FOOT
LOW MID HI LOW MID HI
2 0 0 0
1 2 0 TAP 1 2 0
BPM
ms
EDIT 2 CH
PICH 0
BPM
%
Touch panel (main page)
AUTO lights in
auto mode.
BPM value
display
BPM value
display
TAP lights
during manual
count mode
(TAP button
input)
BANK 3
FX ADJ. FX ADJ.
BANK
EDIT BANK
EDIT
FADER
CURVE
FADER
CURVE
BANK 2
BANK 1 BANK 1
BANK 2
BANK 3
TIME TAP FOOT
2 0 0 0 1 2 0
BPM ms
CH1
ECHO
1
BANK 3
FX ADJ. FX ADJ.
BANK
EDIT BANK
EDIT
FADER
CURVE
FADER
CURVE
BANK 2
BANK 1 BANK 1
BANK 2
BANK 3
TIME TAP FOOT
2 0 0 0 1 2 0
BPM ms
CH1
ECHO
2