Effect functions, 7 fader effects – Pioneer DJm-909 User Manual
Page 25
25
<DRB1349>
EFFECT FUNCTIONS
(*1) When the channel fader or cross fader is used to lowering sound volume, no effect sounds will be heard, even if monitor
SELECT switch is set to the [EFFECT] position.
(*2) When EFFECT switch is turned OFF, no effect sounds will be heard even if the monitor SELECT switch is set to the [EFFECT]
position.
No.
27
28
29
30
31
32
33
34
35
Name
PHASER1
PHASER2
TOUCH PHASER1
TOUCH PHASER2
FILTER (LPF)
FILTER (HPF)
FILTER (BPF)
FILTER PAN
COMPRESSOR
Parameter 1 (TIME/SELECT dial)
Explanation
Set period of phase effect
frequency shift.
Set period of phase effect
frequency shift.
Set sensitivity corresponding to
input volume.
Set sensitivity corresponding to
input volume.
Set period of cutoff frequency
shift.
Set period of cutoff frequency
shift.
Set period of center frequency
shift.
Set period of cutoff frequency
shift.
Set time until completely
compressed. The time required
to return to the original state is
simultaneously set at the same
value.
Setting range (unit)
10 – 32000 (msec)
10 – 32000 (msec)
1 – 100 (%)
1 – 100 (%)
10 – 32000 (msec)
10 – 32000 (msec)
10 – 32000 (msec)
10 – 32000 (msec)
1 – 100 (msec)
Parameter 2 (MIX/DEPTH dial)
Explanation
Rotate to right for stronger effect.
Rotate to right for stronger effect.
Rotate to right for stronger effect.
Rotate to right for stronger effect.
Rotate to right for increased resonance and
more unusual sound.
Rotate to right for increased resonance and
more unusual sound.
Rotate to right for increased resonance and
more unusual sound.
Rotate to right for increased resonance and
more unusual sound.
Change threshold level. Rotate to right for
stronger effect.
No.
36
37
38
39
40
41
42
43
44
45
Name
FADER ROLL (*2)
FADER MULTI TAP
DELAY (*1)
FADER TRANS PAN
FADER PITCH SHIFTER
FADER RING
FADER VOCODER1
FADER VOCODER2
FADER FILTER (LPF)
FADER FILTER (HPF)
FADER FILTER (BPF)
Parameter 1 (TIME/SELECT dial)
Explanation
Set reference
ROLL time
Set reference
effect time
Set reference
effect time.
Set type of pitch
change.
Change
fundamental
frequency of
effect sound.
Set sensitivity
corresponding to
input volume
—
—
—
Setting range (unit)
40 – 10000 (msec)
8 – 1200 (msec)
40 – 2000 (msec)
1 – 3
500 – 8000 (Hz)
1 – 100 (%)
—
—
—
Parameter 2 (MIX/DEPTH dial)
Explanation
Set balance between source and
ROLL sounds.
Set balance between source and
delay sounds.
Set balance between source and
effect sounds.
Set balance between source and
pitch-shifted sounds.
Change effect sound level.
Adjust volume of code selected on
panel menu.
Rotate to right for increased
resonance and more unusual
sound.
Rotate to right for increased
resonance and more unusual
sound.
Rotate to right for increased
resonance and more unusual
sound.
Fader lever
Explanation
Change roll time
Change reference
beat time.
Change cut time
Change pitch of
input sound.
Change frequency
of effect sound
Change fundamental
frequency of
oscillating sound.
Changes cutoff
frequency of low-
pass filter.
Changes cutoff
frequency of high-
pass filter.
Changes band-pass
filter’s center
frequency.
7 Fader effects