Premio Computer Apollo/Shadowhawk - Manual (Page 140)

BIOS Setup Program
117
4.7.2 Hard Disk Drives Submenu
To access this menu, select Boot on the menu bar and then Hard Disk Drives.
Maintenance Main Advanced Security Power Boot Exit
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
The submenu represented in Table 77 is for setting hard disk drive priority.
Table 77. Hard Disk Drives Submenu
Feature Options Description
1 st Hard Disk Drive
(Note)
Dependent on installed
hard drives Specifies the boot sequence from the available hard
disk drives. To specify boot sequence:
1. Select the boot device with <
↑> or <↓>.
2. Press <Enter> to set the selection as the intended
boot device.
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display up
to twelve hard disk drives, the maximum number of hard disk drives supported by the BIOS.
4.7.3 Removable Devices Submenu
To access this menu, select Boot on the menu bar, then Removable Devices.
Maintenance Main Advanced Security Power Boot Exit
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
The submenu represented in Table 78 is for setting removable device priority.
Table 78. Removable Devices Submenu
Feature Options Description
1 st Removable Device
(Note)
Dependent on installed
removable devices Specifies the boot sequence from the available
removable devices. To specify boot sequence:
1. Select the boot device with < ↑> or <↓>.
2. Press <Enter> to set the selection as the intended
boot device.
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display up
to four removable devices, the maximum number of removable devices supported by the BIOS.