Premio Computer Apollo/Shadowhawk - Manual (Page 35)

Intel Desktop Board D845HV/D845WN Technical Product Specification
12
1.2 Overview
1.2.1 Feature Summary
Table 2 summarizes the D845HV and D845WN boards’ major features.
Table 2. Feature Summary
Form Factor D845HV: microATX (9.60 inches by 9.60 inches)
D845WN: ATX (12.00 inches by 9.60 inches)
Processor • Support for an Intel ® Pentium ® 4 processor in an mPGA478 socket
• 400 MHz system bus
Memory
(Refer also to
Table 3, page 13) • Three 168-pin SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for single-sided or double-sided DIMMs (PC133 only)
• Support for up to 3 GB system memory
NOTE: The D845HV/D845WN boards have been designed to support DIMMs
based on 512 Mbit technology for a maximum onboard capacity of up to 3
GB, but this technology has not been validated on this board. Please refer
to the following Intel web sites. For the D845HV board:
http://developer.intel.com/design/motherbd/hv/hv_mem.htm
For the D845WN board:
http://developer.intel.com/design/motherbd/wn/wn_mem.htm
Chipset Intel ® 845 Chipset, consisting of:
• Intel ® 82845 Memory Controller Hub (MCH)
• Intel ® 82801BA I/O Controller Hub (ICH2)
• Intel ® 82802AB 4 Mbit Firmware Hub (FWH)
Video AGP connector supporting 1.5 V 4X AGP cards
I/O Control
(Refer also to
Table 3, page 13) SMSC LPC47M142 LPC Bus I/O controller
Peripheral
Interfaces
(Refer also to
Table 3, page 13) • Up to seven Universal Serial Bus (USB) ports
• Two serial ports
• One parallel port
• IrDA
† -compliant infrared port
• Two IDE interfaces with UDMA 33, ATA-66/100 support
• One diskette drive interface
• PS/2
† keyboard and mouse ports
• Three fan connectors
Expansion
Capabilities • D845HV: Three PCI bus add-in card connectors (SMBus routed to PCI bus
connector 1)
• D845WN: Six PCI bus add-in card connectors (SMBus routed to PCI bus
connector 1)
BIOS • Intel/AMI BIOS (resident in the Intel 82802AB 4 Mbit FWH)
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,
and SMBIOS
continued