Premio Computer Apollo/Shadowhawk - Manual (Page 36)

Product Description
13
Table 2. Feature Summary (continued)
Instantly Available
PC Technology • Support for PCI Local Bus Specification Revision 2.2
• Suspend to RAM support
• Wake on PCI, CNR, RS-232, front panel, PS/2 devices, and USB ports
For information about Refer to
The board’s compliance level with ACPI, Plug and Play, and SMBIOS. Section 1.4, page 17
1.2.2 Manufacturing Options
Table 3 describes the D845HV and D845WN boards’ manufacturing options. Not every
manufacturing option is available in all marketing channels. Please contact your Intel
representative to determine which manufacturing options are available to you.
Table 3. Manufacturing Options
Audio Audio subsystem for AC 97 processing using the Analog Devices AD1885 codec
CNR One Communication and Networking Riser (CNR) connector (slot shared with
PCI bus connector 3 on the D845HV board and with PCI bus connector 6 on the
D845WN board)
LAN Intel ® 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device
Hardware Monitor
Subsystem • Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Two fan sense inputs used to monitor fan activity
The items listed below are component changes for an alternate configuration of the D845HV board
• Delete the auxiliary front panel power/sleep/message-waiting LED connector (shown on page 70)
• Delete the front chassis fan connector (shown on page 60)
• Delete the Mic-in pre-amp for boards equipped with the audio subsystem (described on page 32)
• Delete the SCSI hard drive activity LED connector (shown on pages 63 and 64)
• Delete the serial port B connector (shown on page 70)
• Delete the standby power indicator LED (shown on page 44)
• Delete the third DIMM socket (shown on pages 14 and 15)
• Delete the two USB connectors adjacent to the PS/2 connectors on the back panel (shown on page 54)
• Delete the 47 Ω inductive speaker (described on page 128)
• Replace I/O controller with SMSC LPC47M132 LPC bus I/O controller (functionally equivalent to SMSC
LPC47M142 LPC bus I/O controller but without an integrated USB hub) (described on page 31)
For information about Refer to
Available configurations of the D845HV and D845WN boards Section 1.3, page 17
✏
NOTE
The LAN and the CNR manufacturing options are mutually exclusive.