Premio Computer Apollo/Shadowhawk - Manual (Page 97)

Intel Desktop Board D845HV/D845WN Technical Product Specification
74
2.9 Jumper Blocks
CAUTION
Do not move any jumpers with the power on. Always turn off the power and unplug the power
cord from the computer before changing a jumper setting. Otherwise, the board could be
damaged.
Figure 16 shows the location of the jumper blocks on the D845HV and D845WN boards.
OM11435
1
3
1
3
5
7
9
2
4
6
10
A
B
Item Description Reference Designator
A Front panel audio connector / jumper block J8B4 (D845HV board)
J7B2 (D845WN board)
B BIOS Setup configuration jumper block J9G1 (D845HV board)
J7G1 (D845WN board)
Figure 16. Location of the Jumper Block
2.9.1 Front Panel Audio Connector/Jumper Block
This connector has two functions:
• With jumpers installed, the audio line out signals are routed to the back panel audio line out
connector.
• With jumpers removed, the connector provides audio line out and mic in signals for front panel
audio connectors.
Table 48 describes the two configurations of this connector/jumper block.