Reformating the compactflash card, Using the bios utility – Parker Hannifin PA Series User Manual

Page 36

Advertising
background image

Chapter 3: Starting Your PowerStation

Using the BIOS Utility

PA PowerStation User Guide

3-15

Reformating the CompactFlash Card

Warning:Manually formatting a CompactFlash card in Windows NT, 2000,

XP, or Vista before using Flashback could possibly make the CF

card unusable.

Warning:Removing the CompactFlash card: During a disk transfer

procedure, do not remove the CF card before issuing a Stop or

shutting down the USB port service. Otherwise the last part of

the data will not transfer to the CF card.

To reformat a CF card for a PA PowerStation, complete the following steps

on a personal computer or laptop:

1

Insert the CompactFlash card into the CompactFlash card PC

reader/writer or the PCMCIA slot.

2

Insert the PA PowerStation CD into the CD-ROM drive.

3

Select the Drivers/Utilities selection from the CD menu. On the

Utilities page you will find a link to the web site that contains the

Flashback utility image.

4

Select the Flashback utility web link to open your browser to the

location of the utility.

5

Download the utility from the web site and install it on your

development laptop.

6

Double-click the executable file.
The Flashback Utility dialog box appears.

Note: Reformatting a CompactFlash card using Flashback will erase your

projects from the CF card. You will need to download your projects

to the CF card again. After using Flashback, you may also need to

recalibrate your PA PowerStation display. For instructions, see

Calibrating the Touchscreen on page 4-2.

7

Click the down arrow for the destination drive and choose the correct

drive letter that was assigned to the CF.

8

Press the Restore Image button.

Using the BIOS Utility

This section discusses how to use the BIOS utility on the PowerStation.

There are three instances in which you will need to use the BIOS utility

program:

1

You are starting your system for the first time.

2

You have changed the hardware attached to your system.

Note

The Flashback Utility, will first format the compact flash, and then
copy ROM-DOS, the Shell, and the utilities to the compact flash.

Advertising