Calibrating the touchscreen, Using the machineshop shell calibration utility – Parker Hannifin PA Series User Manual

Page 39

Advertising
background image

Chapter 4: Maintaining the PowerStation

Maintaining the Touchscreen

PA PowerStation User Guide

4-2

Calibrating the Touchscreen

The monitor’s touchscreen is calibrated before leaving Parker. However,

you may need to recalibrate the touchscreen in certain circumstances, such

as:

Moving a CompactFlash card between PA PowerStations

After re-imaging the CompactFlash card

When you use the PA PowerStation for the first time

When you replace the touchscreen

Whenever the cursor does not follow the location where you touch the
screen

Using the MachineShop Shell Calibration Utility

The MachineShop Shell comes with a calibration utility that allows you to

calibrate the touchscreen. To calibrate the touchscreen, complete the

following steps:

1

From the MachineShop Shell Main Menu, select the Settings option,

then select the PowerStation option.

2

The PowerStation Settings page will appear.

3

Select the Calibrate Touchscreen option. The calibration routine will

run automatically.

4

Follow the instructions on the screen.

5

Use your finger to touch the + on the screen.

6

Repeat the previous step two more times. Each time you touch the +

you will hear a faint beep to indicate that the touch has been

accepted.
After the third time, your touchscreen will be calibrated.

Adjusting the Contrast (only available on 5”, 6”, and 8” STN units)

You may adjust the contrast on the PA PowerStation. The contrast is a

property of the LCD.

Note

The Brightness property is fixed and cannot be adjusted.

This property can be adjusted on the STN display only. So before you

begin, you will need to determine whether you own an STN or a TFT

display. To distinguish between the two types of displays and their

resolution, locate the model number on the back of the PA PowerStation

unit and compare the third digit in the model number with the third digit in

Table 4-1: Display Type to determine the type of display you own.

Table 4-1: Display Type

Model No.

View Size

PA-05S/06S-1XX

STN Display - Quarter VGA

Advertising