Pioneer Super Tuner III D AVH-P4950DVD - Manual (Page 31)

Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
When playing the compressed audio disc, the
first 10 seconds of each track of the current
folder (or the first track of each folder) is
played.
! This function is available for CD and com-
pressed audio disc.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Touch SCAN on the function menu to
turn scan play on.
The first 10 seconds of each track is played.
3 When you find the desired track (or
folder) touch SCAN again.
Note
After track or folder scanning is finished, normal
playback of the tracks will begin again.
Selecting audio output
You can switch between stereo and monaural
audio output.
! This function is available for DVD and
Video CD.
! This function is not possible when disc
playback has been stopped.
1 Press A.MENU button to display MENU.
2 Touch FUNCTION to display the func-
tion names.
3 Touch L/R SELECT to select the audio
output.
! L+R – left and right
! LEFT – left
! RIGHT – right
Note
Depending on the disc and the playback location
on the disc, the function may not be selectable,
indicating that operating this function is not pos-
sible.
Resume playback (Bookmark)
The Bookmark function lets you resume play-
back from a selected scene the next time the
disc is loaded.
! This function is available for DVD.
% During playback, press
BOOKMARK (BM) button at the point you
want to resume playback next time.
The selected scene will be bookmarked so that
playback resumes from that point next time.
You can bookmark up to five discs. After that,
the oldest bookmark is replaced by the new
one.
# To clear the bookmark on a disc, press and
hold
BOOKMARK (BM) button during playback.
# You can also bookmark a disc by pressing and
holding
EJECT at the point you want to bookmark.
Next time you load the disc, playback will resume
from the bookmarked point. Note that you can
only bookmark one disc using this method. To
clear the bookmark on a disc, press
EJECT.
Entering disc titles
You can input CD titles and display the title.
The next time you insert a CD for which you
have entered a title, the title of that CD will be
displayed.
Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
10 characters long.
! This function is available for CD.
! When playing a CD TEXT disc, you cannot
switch to T. EDIT. The disc title will have al-
ready been recorded on a CD TEXT disc.
Operating this unit
En
31
Section
03
Operating
this
unit