Pioneer DV-420V-S - Manual (Page 21)

En
Section
04
English
21
<J2L90901A>
Playback
21 20
Playing files stored on USB
devices
 The player may not recognize the USB
device, may not play files or may not sup‑
ply power to the USB device. For details,
see When a USB device is connected on
page 40.
 Pioneer does not support that all files
recorded on all USB devices will play or
that power will be supplied to the USB
device. Also note that Pioneer will accept
no responsibility whatsoever for loss of
files on USB devices caused by connec‑
tion to this player.
1 Turn the power on.
Press  STANDBY/ON.
2 Switching the input to the USB mode.
Press DVD/USB.
USB MODE is displayed on the front panel
display.
3 Connecting USB devices.
The Disc Navigator appears automatically.
USB device
Player’s front panel
To USB port
4 Starts playback.
Use
/ / /  to select the file, then press
ENTER.
 Turn the power off before removing the USB
device.
 The input will remain in the USB mode the
next time the power is turned on. To return
to the DVD mode, press DVD/USB (or press

OPEN/CLOSE to open the disc tray). 
Recording audio CD tracks
on USB devices
 The tracks of audio CDs loaded in the
player can be recorded on a USB device
connected to the USB port.
 It may not be possible to record tracks of
audio CDs on a USB device. For details,
see When a USB device is connected on
page 40.
Recording all the tracks
1 Load the audio CD.
 If playback starts automatically, press
 STOP to stop playback.
2 Display the CD -> USB Rec screen.
Press USB REC.
CD –> USB Rec
Select Track
Bitrate
Start
Selected Track
Total Time
Track 1–13
 Track01
 Track02
 Track03
 Track04
 Track05
 Track06
 Track07
 Track08
 01:43
 03:17
 04:18
 04:59
 04:20
 04:38
 04:40
 04:11
 128kbps
 13
 055:07
3 Start recording.
Use
/ / /  to select Start, then press
ENTER.
Selecting the track(s) to be
recorded
1 Load the audio CD.
 If playback starts automatically, press
 STOP to stop playback.
2 Display the Home Menu.
Press HOME MENU.
3 Select CD -> USB Rec.
Use
/ / /  to select, then press ENTER.