Pioneer DV-420V-S - Manual (Page 27)

En
Section
05
English
27
<J2L90901A>
Changing the Settings (Initial Settings)
27
Operating the Initial Settings
menu
Initial Settings cannot be selected during
playback. Stop the disc first.
1 Display the Home Menu.
Press HOME MENU.
2 Select Initial Settings.
Use
/ / /  to select, then press ENTER.
3 Select the item and change the setting.
Use
/ / /  to select, then press ENTER.
Notes
 HDMI Out, HDMI Resolution and
HDMI Color can only be set when the player
is connected to an HDMI‑compatible device
using an HDMI cable.
 Digital Audio Out, AV Connector Out and
Component Out cannot be set when the
player is connected to an HDMI‑compatible
device using an HDMI cable.
Setting the Component Out and
HDMI Resolution settings back to
their defaults
1 Turn the player’s power off.
Press  STANDBY/ON.
2 Press  STANDBY/ON while pressing

.
Use the buttons on the player’s front panel.
The power turns on.
Restoring all the settings to the
defaults
1 Turn the player’s power off.
Press  STANDBY/ON.
2 Press  STANDBY/ON while pressing .
Use the buttons on the player’s front panel.