Pioneer BDP-V6000 User Manual

Page 17

Advertising
background image

17

En

02

4

Mount the underplate.

Inse

rt the underplate between the left and right rack

mount b

rackets, then mount with the included gray

sc

rew.

5

Mount the set on the rack.

Check that the sc

rews fastened in step 3 are securely

tightened.

Caution

• The

rack mount brackets included with the set allow

the set to be mounted on unive

rsal pitch or wide pitch

racks conforming to EIA 19” standards.

• Check that the

rack has the appropriate strength for

the set’s weight and usage envi

ronment before

mounting.

• The * sc

rews for fixing the rack mount brackets to the

rack are not included. Choose screws with the
a

ppropriate strength and length for the set’s weight

and usage envi

ronment to mount the set on the rack.

To ensu

re that the set is fixed securely on the rack, be

su

re to fasten it with screws in all 4 rack mount screw

holes.

• The mounting

procedure should be performed by at

least two

people.

• Be ve

ry careful not to get your fingers, etc., caught

between the

rack mount brackets and the rack.

6

Check that the screws fastened in step 5 are

securely tightened.
Once this is checked, the

procedure is finished.

• If the

re is any looseness in the screws * or the screws

removed from the player, vibrations generated by the
rotation of discs in the player or by other products
could cause noise o

r to lead the player falling off the

rack, resulting in injury or damage to the equipment.
Be su

re to check that the screws are securely

fastened.

Caution

• Pay attention to the following when

removing the set

f

rom the rack and moving it:

– Be su

re to remove any disc from the set.

– Tu

rn the set’s power off, then disconnect

connected cables, etc.

– Be ca

reful that the set does not fall when loosening

the sc

rews fastening it to the rack (the procedure

should be

performed by at least two people).

– Afte

r removing the set from the rack, be sure to

place it on a stable surface, such as on a flat table.

Underplate

Included gray screw

Set

Rack
(conforming to
EIA standards)

Rack mount
screw holes

* screws

* screws

Rack mount
bracket

V6000_CUXJ_EN.book 17 ページ 2009年6月5日 金曜日 午前11時57分

Advertising