Pioneer BDP-V6000 - Manual (Page 69)

69
En
09
• No sound is out put.
• Sound is not out put
properly.
A re you trying to listen to the
sound of the HDMI OUT
te rminal while watching the
picture from the
COMPONENT VIDEO or
VIDEO output terminals?
Audio signals a re not output from the HDMI OUT terminal when video
signals a re being output from the COMPONENT VIDEO or VIDEO
out put terminals. When watching the picture of the COMPONENT
VIDEO or VIDEO output terminals, connect an optical digital audio
cable o
r regular audio cables to listen to the sound (page 21). Once
connections a re completed, use Setup Navigator to make the player’s
settings ( page 23).
Is HDMI Audio Out properly
set?
Set HDMI Audio Out to Auto or PCM. (page 44).
Is Output Terminal properly
set?
When ANALOG AUDIO is selected at Output Terminal, no audio
signals a re output from the HDMI OUT or DIGITAL OUT terminal
( page 51).
Is the out put video resolution
properly set?
Use OUTPUT RESOLUTION to switch to the resolution at which the
video and audio signals a re output (page 27).
Is the AV receiver or
am plifier, etc., connected to
the AUDIO OUT terminals?
To listen to 2-channel analog audio, connect to FRONT (L/R) of the
AUDIO OUT terminals (page 13) and set Audio Output Mode to 2
Channel (page 43).
A re the speakers properly
set?
When the AV receiver or amplifier, etc., is connected to the AUDIO
OUT terminals and Audio Output Mode is set to Multi-channel, set
Speaker Setup properly (page 47).
Is a DVI device connected? The sound will not be out put from the HDMI OUT terminal if a DVI
device is connected. Connect the device to a DIGITAL OUT terminal or
the AUDIO OUT terminals (page 21).
Fo r some BDs, audio signals are only output from DIGITAL OUT
te rminal or the HDMI OUT terminal.
Multi-channel sound is not
out
put.
Is Output Terminal properly
set?
Linea r PCM (2-channel) audio signals are output from output terminals
othe r than the one set at Output Terminal under Audio Out. Set
Output Terminal properly (page 51).
Is the audio out put of the
connected AV receiver or
am plifier, etc., properly set?
Read the o perating instructions of the connected AV receiver or
am plifier and check the audio output settings of AV receiver or
am plifier.
Is multi-channel sound
selected? Use the menu sc reen or AUDIO to switch the disc’s sound to multi-
channel.
Is the AV receiver or
am plifier, etc., connected to
the AUDIO OUT terminals?
When the AV receiver or amplifier, etc., is connected to the AUDIO
OUT terminals, set Audio Output Mode to Multi-channel (page 43).
Also, set
Speaker Setup properly (page 47).
Noise can be hea rd when
out putting DTS Digital
Su rround signals from the
DIGITAL OUT terminal.
Is the connected AV receiver
o r amplifier compatible with
DTS Digital Su rround?
If an AV receiver or amplifier that is not compatible with DTS Digital
Su rround is connected to the DIGITAL OUT terminal, set DTS Out to
DTS  PCM (page 43).
192 kHz o r 96 kHz digital
audio signals cannot be
out
put from the DIGITAL
OUT terminal.
It is not possible to output 192 kHz or 96 kHz digital audio signals from
this player’s DIGITAL OUT terminal. The signals are automatically
conve rted to 48 kHz or less for output.
Seconda ry audio or
inte ractive audio is not
out put.
Is HDMI Audio Out properly
set?
When listening to the sound f rom an HDMI OUT terminal, set HDMI
Audio Out to PCM (page 44).
A re Dolby Digital Out and
DTS Out properly set?
When listening to the sound f rom an DIGITAL OUT terminal, set Dolby
Digital Out to Dolby Digital 1, DTS Out to DTS 1 (page 43).
Sound is fast o r slow. When an HDMI cable is
connected, a
re audio signals
being out put from devices
connected with cables othe r
than HDMI cables?
When a Pionee r AV receiver or amplifier compatible with the PQLS
function is connected di rectly to the player’s HDMI OUT terminal using
an HDMI cable, the PQLS function is activated when playing discs.
Because of this, the sound out put from components other than the
ones connected by HDMI cable may be fast o r slow. If this happens, set
PQLS to Off (page 44).
Afte r a disc is inserted,
Loading stays displayed and
playback does not start.
A re there too many files
recorded on the disc?
When a disc on which files a re recorded is inserted, depending on the
numbe r of files recorded on the disc, loading may take several dozen
minutes.
 is displayed in file names,
etc. The cha racters that cannot be displayed on this player are displayed in
.
Problem Check Remedy
V6000_CUXJ_EN.book 69 ページ ２００９年６月５日 金曜日 午前１１時５７分