Pioneer BDP-V6000 - Manual (Page 23)

23
En
04
Chapter 4
Getting Started
Making settings using
the Setup Navigator
menu
Be su re to perform these settings when using the player
fo r the first time.
Caution
• Befo re turning on the power, check that the
connections between the player and other devices are
co rrect. Also, turn on the power of the devices
connected to the player before turning on the player’s
power.
• The sc reen in step 11 and test tones are output
simultaneously acco rding to the settings in steps 4 to
7. Lowe r the volume of the devices connected with the
player.
Note
• By facto ry default, the KURO LINK function is not
activated. To activate the KURO LINK function using
Setu
p Navigator, KURO LINK is set to On on the
player (page 44), and if a Pioneer KURO LINK-
com
patible Flat Panel TV is connected, turn on the
TV's KURO LINK function.
• When a Pionee r Flat Panel TV or front projector
com patible with the KURO LINK function is
connected to the player using an HDMI cable, the
player is automatically set to the optimum picture
quality fo
r the connected device.
1 Turn on the TV’s power and switch the input.
See the TV’s o perating instructions for instructions on
o perating the TV.
2 Turn on the player’s power.
P ress  STANDBY/ON.
Check that the Setup Navigator menu is displayed.
 If the Setup Navigator menu is not
displayed
 Press
HOME MENU to display the Home
Menu, select Initial Setup  Setup Navigator 
Start, then press ENTER.
3 Select the OSD language.
Use
/ to select, then press ENTER.
When a Pionee r Flat Panel TV that is compatible with
KURO LINK is connected to this player’s HDMI OUT
te rminal, language settings are imported from the
Pionee r Flat Panel TV’s language settings before Setup
Navigator begins.
4 Select and set the video and audio output
terminals.
Select the actually connected video and audio out
put
te rminals.
Use
/// to select, then press ENTER.
Caution
• When HDMI is selected for Video, no video signals
a re output from the COMPONENT VIDEO or VIDEO
out put terminals.
• When COMPONENT VIDEO or VIDEO is selected at
Video, no video signals are output from the HDMI
OUT terminal.
• The video and audio signals out put from the set
out put terminals are output synchronously (lip
synch ronization).
• When COMPONENT VIDEO or VIDEO is selected at
Video, no sound is output if HDMI is selected at
Audio.
Follow the
procedure below to redo the connections,
then select the proper connection at the setup
sc reen.
TOP MENU TOOLS
HOME
MENU RETURN
ENTER
Setting item Output terminal name
Vid
e
o
HDMI HDMI OUT
COMPONENT VIDEO VIDEO OUT COMPONENT VIDEO
VIDEO VIDEO
Aud
io
HDMI HDMI OUT
DIGITAL AUDIO DIGITAL OUT
ANALOG AUDIO AUDIO OUT
Setup Navigator
BD PLAYER
Please select the on-screen display language.
Audio, subtitle and BDMV/DVD-Video menu
language will also be set.
V6000_CUXJ_EN.book 23 ページ ２００９年６月５日 金曜日 午前１１時５７分