Panasonic SCHT56 - Manual (Page 18)

18
RQTX0175
Sound field
Adjusting SFC
You can adjust the sound field by adjusting the level of the
speakers. This adjustment can be made for each SFC mode
(➡ page 15).
1. Press [-LEVEL, ―TEST] to select the speaker
channel.
Each time you press the button:
C → RS → LS → SUBW
2. Press [-] or [+] to adjust the level.
C, RS, and LS: -6 dB to +6 dB
SUBW: OFF
↔ MIN ↔ 1 - 19 ↔ MAX
Remote control
Center focus
Use with discs where the dialogue is recorded in the center
channel.
You can make the sound of the center speaker seem like it is
coming from within the television.
Press and hold [-EFFECT, ―C.FOCUS].
Remote control
“C.FOCUS” lights.
The factory setting is off.
You cannot use this when the sound mode is STEREO.
You can adjust the effect of the Dolby Pro Logic ΙΙ MUSIC and
PANORAMA modes (➡ page 15).
You can make up for differences in the output level of the front
and surround speakers.
You can choose a level between -3 and +3: Increase the level
to move sound to the front speakers, decrease to move it to the
surround speakers.
The factory setting is 0.
1. Press [-EFFECT, ―C.FOCUS] to select “DIMEN”.
2. Press [-] or [+] to adjust the effect.
Remote control
Dimension Control “DIMEN”
You can adjust the effect of the Dolby Pro Logic ΙΙ MUSIC and
PANORAMA modes (➡ page 15).
This adjustment helps you realize a more natural sound image
when listening to music. Move sound out into the front speakers
to improve the overall front image, or add sound to the center
speaker to fix the center image.
You can choose a level between 0 (the center speaker is
dominant) and 7 (center sound is spread out).
The factory setting is 3.
1. Press [-EFFECT, ―C.FOCUS] to select “C-WDTH”.
2. Press [-] or [+] to adjust the effect.
Remote control
Center Width Control “C-WDTH”
Sound field
MUSIC MOVIE
SFC
-EFFECT
C.FOCUS
-LEVEL
TEST
OK
VOLUME
TOP MENU
FUNCTIONS
TUNER
DIRECT TUNING
DIRECT NAVIGATOR
SUB MENU RETURN
SUBWOOFER
7
0
8 9
10
4 5 6
> =
u
q g h
SKIP SLOW/SEARCH
STOP PAUSE PLAY
t y i
-/--
SURROUND
PL OFF
S -EFFECT
C.FOCUS
-LEVEL
TEST
Main unit
You can adjust the balance of the front speakers.
1. Use the menus to select “BALANCE”.
➡ MENU operation on page 16.
2. Press [TUNE 2 / - or 1 / +] to adjust the balance.
Balance
You can adjust the level of the bass and treble.
1. Use the menus to select “BASS” or “TREBLE”.
➡ MENU operation on page 16.
2. Press [TUNE 2 / - or 1 / +] to adjust the tone.
Input signals must be either analog or PCM, and Dolby Pro
Logic
ΙΙ and SFC must be off ( ➡ page 15) .
Main unit
Adjusting the tone
SC-HT56P_MP (RQTX0175-2P).indb 18 9/19/2008 12:28:58 PM