Panasonic SCHT56 - Manual (Page 21)

21
RQTX0175
Remote control operation guide/Specifications
Changing the remote control code
Change the code if you find the
remote control unintentionally also
controls other Panasonic equipment.
Do the following to set the remote
control code and this unit’s remote
control mode to the same one.
Change the main unit’s mode Change the remote control’s code
To restore the code to “1”
On the main unit: In step 3, select “1”.
On the remote control: In step 6, while
pressing [OK], press and hold [1] for about
2 seconds.
•
•
1. Enter the SETUP menu.
Press and hold .
2. Select and press [ENTER].
3. Select and press [ENTER].
4. Press [-MENU, –SETUP, RETURN]
repeatedly to select “EXIT” and
press [ENTER].
MENU
RETURN
SETUP
5. Press .
6. While pressing , press and
hold
for about 2 seconds.
Remote control operation guide
Specifications (IHF’78)
g AMPLIFIER SECTION
RMS Output Power of each channel driven
10 % total harmonic distortion
1 kHz Front CH 125 W per channel (3 Ω)
1 kHz Surround CH 125 W per channel (3 Ω)
1 kHz Center CH 250 W per channel (6 Ω)
100 Hz Subwoofer CH 250 W per channel (6 Ω)
Total RMS Output Power 1000 W
Rated minimum sine wave RMS power output
1% total harmonic distortion (Dolby Digital mode)
120 Hz to 20 kHz Front CH 53 W per channel (3 Ω)
120 Hz to 20 kHz Surround CH 53 W per channel (3 Ω)
120 Hz to 20 kHz Center CH 133 W per channel (6 Ω)
45 Hz to 120 Hz Subwoofer CH 141 W per channel (6 Ω)
Total FTC Output Power 486 W
Rated minimum sine wave RMS power output
1% total harmonic distortion (Stereo mode)
120 Hz to 20 kHz Front CH 52 W per channel (3 Ω)
45 Hz to 150 Hz Subwoofer CH 141 W per channel (6 Ω)
Total FTC Output Power 245 W
Total harmonic distortion
half power at 1 kHz (Front CH) 0.5 % (3 Ω)
Input sensitivity
DVD-P, TV, BD/DVR 450 mV, IHF'66
S/N at rated power
DVD-P, TV, BD/DVR 80 dB
Input impedance
DVD-P, TV, BD/DVR 47 k Ω
Tone controls
BASS 50 Hz, +6 dB to -6 dB
TREBLE 20 kHz, +6 dB to -6 dB
Analog input/output
Analog audio input 3
Wireless Ready SH-FX67
g OPERATING CONDITION
Operating temperature range 0°C to +40°C (+32°F to +104°F)
Operating humidity range 20% to 80% RH (no condensation)
g FM TUNER SECTION
Frequency range 87.9 MHz to 107.9 MHz
Sensitivity 11.2 dBf (2 µV), IHF'58
Total harmonic distortion
MONO 0.3%
STEREO 0.4%
S/N
MONO 64 dB
STEREO 63 dB
Antenna terminal 75 Ω (unbalanced)
g AM TUNER SECTION
Frequency range 530 kHz to 1710 kHz
g SPEAKER SECTION
 Rating with low-cut filter equipped Amplifier
Front speaker (SB-HF56)
Type 1 Way, 1 Speaker
Speaker unit
Full range 6.5 cm (2 1 / 2 ") cone type
Input power (IEC) 125 W  (Max/3 Ω)
Output sound pressure 80 dB/W (1.0 m)
Frequency range 86 Hz to 25 kHz (-16 dB)
98 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D) 92 mm x 272 mm x 95 mm
(3 5 / 8 " x 10 23 / 32 " x 3 3 / 4 ")
Weight 0.74 k g (1.6 lb.)
Surround speaker (SB-HS760)
Type 1 Way, 1 Speaker
Speaker unit
Full range 6.5 cm (2 1 / 2 ") cone type
Input power (IEC) 125 W  (Max/3 Ω)
Output sound pressure level 80 dB/W (1.0 m)
Frequency range 95 Hz to 25 kHz (-16 dB)
120 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D) 92 mm x 142 mm x 95 mm
(3 5 /
8
" x 5 19 /
32
" x 3 3 /
4
")
Weight 0.6 k g (1.32 lb.)
Center speaker (SB-HC760)
Type 2 Way, 2 Speakers
Speaker unit
Full range 6.5 cm (2 1 /
2
") cone type x 2
Input power (IEC) 250 W  (Max/6 Ω)
Output sound pressure level 82 dB/W (1.0 m)
Crossover frequency 5 kHz
Frequency range 80 Hz to 25 kHz (-16 dB)
96 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D) 270 mm x 94 mm x 95 mm
(10 5 / 8 " x 3 11 / 16 " x 3 3 / 4 ")
Weight 1.3 k g (2.9 lb.)
Subwoofer (SB-HWX50)
Type 1 Way, 1 Speaker
Speaker unit (Woofer) 16 cm (6 1 / 2 ") cone type
Input power IEC 250 W (Max/6 Ω)
Output sound pressure level 78 dB/W (1.0 m)
Frequency range 35 Hz to 200 Hz (-16 dB)
40 Hz to 198 Hz (-10 dB)
Dimensions (W x H x D) 181 mm x 361 mm x 315 mm
(7 1 / 8 " x 14 7 / 32 " x 12 13 / 32 ")
Weight 4.7 k g (10.4 lb.)
g GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 125 W
Dimensions (W x H x D) 430 mm x 105 mm x 388 mm
(16 15 / 16 " x 4 1 / 8 " x 15 9 / 32 ")
Weight 4 k g (8.8 lb.)
Power consumption in standby mode:
HDMI On:
0.7 W
HDMI Off: 0.3 W
Notes:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
Digital input/output:
HDMI Input 2
HDMI Output 1
Optical digital input 2
Coaxial digital input 1
SC-HT56P_MP (RQTX0175-2P).indb 21 9/19/2008 12:29:08 PM