Controls and displays 04 – Pioneer VSX-D712 User Manual
Page 30
Controls and displays
04
30
En
9
STATION +/– buttons
Selects station presets when using the tuner
(page 55).
10 TUNING +/– buttons
Selects the frequency when using the tuner
(page 54).
11 LISTENING MODE buttons
STANDARD
Press for Standard decoding and to
switch between the various Pro Logic II
and Neo:6 options (page 38).
ADVANCED SURROUND
Use to switch between the various
surround modes
STEREO/DIRECT
Switches between direct and stereo play-
back. Direct playback bypasses the tone
controls and channel levels for the most
accurate reproduction of a source
12 SIGNAL SELECT
Use to select an input signal (page 37).
13 MIDNIGHT/LOUDNESS
Use Midnight when listening to movie
soundtracks at low volume. Use Loudness to
boost the bass and treble at low volume
14 SPEAKERS
Use to cycle through the speaker system:
A
B
A+B (page 23)
15 SB CH MODE
Selects the surround back channel mode
(page 40) and the Virtual Surround Back
(VSB) mode (page 41).
16 TONE
Press this button to access the bass and
treble controls, which you can then adjust
with the
MULTI JOG dial (page 42).
17 QUICK SETUP
See Using the Quick Setup on page 13.
18 VIDEO INPUT
See Connecting to the front panel video
terminal on page 19.
19 FL DIMMER
Use this button to make the fluorescent
display (FL) dimmer or brighter.
20 INPUT ATT
Use to attenuate (lower) the level of an analog
input signal to prevent distortion.
21 MPX
Press to receive a radio broadcast in mono
(page 54).
22 BAND
Switches between AM and FM radio bands
(page 54).
23 CLASS
Switches between the three banks (classes)
of station presets
(page 55).
24 TUNER EDIT
Press to memorize and name a station for
recall
(page 55).