Pioneer VSX-D712 - Manual (Page 58)

Controlling the rest of your system 09
58
En
Chapter 9:
Controlling the rest of your
system
Setting the remote to control
other components
There are several ways to set your remote to
control the other components in your system.
The easiest way to do this is to assign the
component’s manufacturer preset code
(starting on page 63) to one of the
MULTI
CONTROL buttons on the remote control.
The buttons can be set to control the following
components:
• The remote control will exit an operation
after 1 minute of inactivity.
Selecting preset codes
directly
1 While pressing the RECEIVER button,
press and hold the 1 button.
The LED blinks.
2 Press the MULTI CONTROL button for
the component you want to control.
The LED lights.
3 Use the number buttons to enter the
preset code (see page 63)
The LED blinks again.
Controllable Components
DVD or LD player
TV or Satellite tuner
VCR or Digital Video Recorder
CD player
CD Recorder, Tape deck
or MD player
TV or Cable TV tuner
FM/AM tuner
Button
DVD/LD:
TV/SAT:
VCR/DVR:
CD:
CD-R/TAPE:
TV CONT:
TUNER:
MASTER
VOLUME
TUNE
TUNE
ST ST
ENTER
MULTI CONTROL
DVD/LD TV / SAT
C D
VCR/DVR TV CONT
TUNER CD-R/TAPE RECEIVER