PYLE Audio PLDVCR500 - Manual (Page 39)

38
Before doubting about troubles (VCR)
Symptom
Power On does not work.
It does not work even in Power
On .
A videotape is not inputted in.
A videotape is not ejected.
A channel on video and a play
screen does not appear.
- a Please check whether a power plug is inserted in an electric outlet.
- The Polarity of power cord is not correct.
Checks
- Please check whether a videotape is inserted in.
- a Try to insert a plug again.
- Check circuit fuse at source of power.
(see vehicle/converter manual.)
- In case the product is used for a long time, a videotape may not be
ejected for a film inside may be stretched. In the case, please pull
out a power plug for about 10mins and then press EJECT button.
- a Please check your antenna s connection.
- a TV channel should be fixed on video channel (3 or 4).
- a Please check your antenna s signal whether it may be weak.
In case of its weakness, please use a frequency amplifier connected
with the device.
Noise (screen noise) appears on
screen. - a While in no use of VCR, was it turned on?
- a While in recording a program, do you watch another channel?
While in playing, noise appears.
- Please press TRACKING for better screen. Videotape may be
poor. Try to change it to another one.
- a Please check whether a power plug is inserted in an electric outlet.
- a Please check whether a videotape is in.
- a Please check whether a videotape is inserted in a right direction
(a side of transparent window should be on the upside)
- a Have you inputted a videotape again just after the tape was
ejected? Please try it again after fully ejecting it.
- a When a videotape forces to be ejected, the tape may not be
inputted. In the case, please pull out an outlet, and then push the
tape smoothly.
On inputting a videotape,
the tape is re-ejected. - That s why a safe mode to protect a videotape is operated
automatically. Please pull out the tape and input it again.
Sound and screen are irregular.
- a Please use a head-cleaner to clean VCR heads. VCR heads may
be contaminated.
Sound comes out but screen does
not appear.
Screen is irregular and stripes appears.
"Screen Error" message is displayed
in a screen.