PYLE Audio PLDVCR500 - Manual (Page 43)

42
Analogue Audio output
(2CH. L/R) * DVD : 48/96KHz sampling
* VCD : 44.1KHz sampling
* CD : 44.1KHz sampling
Digital Audio output (COAXIAL) * DVD : 48KHz sampling
* VCD : 44.1KHz sampling
* CD : 44.1KHz sampling
Vibration * Data read Operation :
0.25G(0'P), at 10 to 500Hz sweep, sine wave,
1 Octave/min(except resonance point)
* Non-operating :
2.0G rms, at 10 to 500Hz random
(30min/Axis for X, Y, Z)
After test, there shall be no hard errors.
Shock
* Data read Operation :
6G, 11msec half sine wave
(20 shocks for X,Y,Z with 3 seconds between shocks)
* Non-operating :
60G,11msec half sine wave
After test, there shall be no hard errors
Electrostatic
Discharge
Requirements
* The drive should withstand 8kV test voltage
of Electrostatic Discharge and meet
the acceptance criteria as specified in IEC 801-2.
* MTBF : 100,000 POH at 20% duty cycle
in room temperature.
* MTTR : max. 30 min
* Tray : min. 30,000 cycle (with limit switch)
* Feeding : min. 1 million full stroke seeks
(without limit switch)
* Noise : max. 40 dB (at 1 m) Loader Reliability
* DVD : 2.76 MB/sec(2X Speed in CLV mode)
* CD : max. 600 KB/sec(4X Speed in CLV mode) Data Transfer
Rate(Sustained)
* DVD : Less than 300 ms (Average), random
Less than 360 ms (Average), full stroke
* CD : Less than 340 ms (Average), random
Less than 400 ms (Average), full stroke Access Time
256KB (DVD/CD) Data Buffer
* max. 10E-12 (CD) , max. 10E-17 (DVD) Error Rate
* Type : motorized tray
* Time : 1.5 sec(typical) Disc Loading