PhatNoise XXV-01D User Manual
Page 19
English
|
19
6
Select the graphic/ spectrum analyzer
display part display
Push the Control knob towards [
4] or
[
¢].
Each time you press the button, the graphic
display/ spectrum analyzer display alternates
between the displays shown in the table below.
Graphic display/ Spectrum Analyzer display
Movie 1
Movie 2
Movie 3 (Movie 1 and Movie 2)
Spectrum analyzer 1
…
Spectrum analyzer 8
Wallpaper & *Downloaded Wallpaper
7
Exit display control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
• * For Download Wall Paper, refer to <Picture
downloading> (page 52).
• During standby, Spectrum analyzer cannot be
selected.
Display Type A/ Display Type B
Wallpaper selecting
Selecting a wallpaper to display when Display
Type is set to "Display Type A"/ "Display Type B".
1
Select the wallpaper display
Refer to <Graphic part/ Spectrum Analyzer
Display Switching> (page 18).
2
Select the wallpaper
Display the wallpapers one after another
Press the Control knob.
Each time you press the knob, the Wallpaper
scan is turned ON and OFF.
When scan is ON, "SCAN" is displayed.
When scan is ON, each wallpaper is displayed
every several seconds.
Select wallpaper manually
1 Turn the wallpaper scan OFF.
Press the Control knob.
Each time you press the knob, the Wallpaper
scan is turned ON and OFF.
2 Select the wallpaper.
Push the Control knob towards [FM] or
[AM].
Each time you push the knob, the Wallpaper
changes.
3
Exit Display Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.