PhatNoise XXV-01D - Manual (Page 49)

English | 49
Display Setting
"Zone2: Rear" Sub source (Auxiliary input source) is to be rear
channel.
"Zone2: Front" Sub source (Auxiliary input source) is to be front
channel.
Other than Standby mode
B.M.S. (Bass Management System)
Adjust the bass boost level of the external
amplifier using the main unit.
Display Setting
"AMP Bass: Flat" Bass boost level is flat.
"AMP Bass: +6" Bass boost level is low (+6dB).
"AMP Bass: +12" Bass boost level is mid (+12dB).
"AMP Bass: +18" Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers, there are the models you can set from
Flat to +18 dB, and the models you can set from Flat
to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass: +18" will not work
correctly even if it is selected.
Other than Standby mode
B.M.S. Frequency Offset
Setting the central frequency, boosted by B.M.S.
Display Setting
"AMP FREQ: Normal" Boost with the normal central frequency.
"AMP FREQ: Low" Drop the normal central frequency 20%.
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the
unit.
1 Select AMP Control mode
Push the Control knob towards [ 4] or
[ ¢].
Select the "AMS Control" display.
2 Enter AMP Control mode
Press the Control knob for at least 1 second.
3 Select the AMP Control item for adjustment
Push the Control knob towards [FM] or [AM].
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
Push the Control knob towards [ 4] or
[ ¢].
5 Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.
Traffic Information
Switching to traffic information automatically
when a traffic bulletin starts even when you aren’t
listening to the radio.
Display Setting
"TI: OFF" The Traffic Information function is OFF.
"TI: ON" The Traffic Information function is ON.
When a traffic bulletin starts, "Traffic INFO" is
displayed it and it switches to traffic information.
• During reception of an AM station when the Traffic
Information function is turned ON, it switches to an
FM station.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it’s automatically
the remembered volume.
Receiving other traffic information stations
(In tuner source)
Push the Control knob towards [ 4] or
[ ¢].
• You can change the traffic information station when
listening to the radio.