PhatNoise XXV-01D - Manual (Page 58)

/°
ККК
" /
К 1/
*°
" /
," /КUК
," /КUК,
,

,КUК
,

,КUК,
q ³
," /
,

,
-1
7""
,

18Ê
58 | English
Connecting Wires to Terminals
FM/AM antenna input
Front left output (White)
Front right output (Red)
Fuse (10A)
Wiring harness
(Accessory
1)
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left speaker
To front right speaker
To rear right speaker
To rear left speaker
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse box
Battery
If no connections are made, do not let the wire come out from the tab.
Rear right output (Red)
Subwoofer left output (White)
Power control wire (Blue/White)
Motor antenna control wire
(Blue)
Dimmer control wire
(Orange / White)
When using the optional power amplifier, connect to its power
control terminal.
To car light control switch
Depending on what antenna you are using, connect either to the
control terminal of the motor antenna, or to the power terminal for
the booster amplifier of the film-type antenna.
AUX left input (White)
AUX right input (Red)
External amplifier control wire
(Pink / Black)
To "EXT.AMP.CONT." terminal of the amplifier having the
external amp control function.
Subwoofer right output (Red)
Rear left output (White)
To connect the KENWOOD navigation system, consult your
navigation manual.
TEL mute wire (Brown)
Connect to the terminal that is grounded when either the telephone
rings or during conversation.
To connect these leads, refer to the
relevant instruction manuals.
To KENWOOD disc changer/
External optional accessory