Pioneer VSX-52TX - Manual (Page 59)

Other connections 10
59
En
2 Press (SHIFT+) INPUT SELECT to select the input
source you want to listen to in the sub room.
3 Use (SHIFT+) VOLUME +/– to adjust the volume.
You won’t be able to adjust the volume if it is set to FIXED
in the Multi Room Setup on page 67.
• You can only increase the volume to 0dB .
• In addition to the controls above, you can also use the
CLASS , STATION +/– and number buttons when
using the tuner.
Using the front panel multi-room controls
1 Press the MULTI ROOM ON/OFF button on the
front panel.
The MULTI-ROOM indicator lights in the front panel
display to indicate the multi-room control has been
switched on.
2 Press CONTROL.
Make sure that any operations for the sub room are done
while
MR: (and the selected component) shows in the
display. If this is not showing, the front panel controls
affect the main room only.
3 Use the MULTI JOG dial to select the source.
Select between DVD/LD , TV/SAT , DVR/VCR , TUNER ,
CD-R/TAPE/MD or CD (in that order).
• If you select TUNER , you can use the remote control
to select a preset station (see Listening to station
presets on page 48 if you’re unsure how to do this).
4 Use the MASTER VOLUME dial to adjust the
volume.
This is only possible if you selected the VARIABLE
volume control in Multi Room Setup on page 67.
• You can only increase the volume to 0dB .
5 When you’re finished, press CONTROL again to
return to the main room controls.
You can also press the MULTI ROOM ON/OFF button on
the front panel to switch off all output to the sub room.
• Even if you don’t press CONTROL above, the system
automatically switches back to the main room
controls.
Note
• Multi-room can’t be used when you’re setting up the
system (from the on-screen System Setup menu).
• You won’t be able to switch the main room off
completely unless you’ve switched off the multi-room
control first.
• When the multi-room feature is switched on, you can
also change the sub room input source with the front
panel
MULTI JOG dial, even when the main unit is in
standby.
• Remote operation may not be possible if direct light
from a strong fluorescent lamp is shining on the IR
receiver remote sensor window.
• The tuner cannot be tuned to more than one station
at a time. Therefore, changing the station in one
room also changes the station in the other room.
Please be careful not to change stations when
recording a radio broadcast.
• The volume levels of the main and sub rooms are
independent.
• When the MULTI ROOM OUT jacks are connected to
a sub room amplifier with a remote sensor and
Pioneer
CONTROL terminals (page 22), both the IR
receiver and the amplifier may receive remote control
commands (making correct operation impossible)
during multi-room operation. In this case, place the
IR receiver and amplifier apart from each other, and
point the remote control directly at the IR receiver
during operation.
• If you don’t plan to use the multi-room feature for
awhile, turn off the power in both the sub and main
rooms. Make sure the
MULTI-ROOM indicator goes
off.
• The sleep timer affects the sub room when the multi-
room feature is on.
MASTER VOLUME
DVD/LD TV/SAT DVR/VCR VIDEO1
CD CD-R/ TAPE/MD
STANDBY/ON
MULTI JOG
TUNER VIDEO2
VSX-52TX AUDIO/VIDEO MULTI-CHANNEL RECEIVER
LISTENING MODE SELECT
ENTER
PHONES
TUNER CONTROL
TUNER EDIT
SYSTEM SETUP RETURN CONTROL ON/OFF MCACC SETUP MIC
DIGITAL IN S-VIDEO VIDEO
VIDEO2 INPUT
AUDIO L R
MULTI ROOM
MULTI JOG MULTI JOG
TUNING/ STATION BAND MPX TONE ACOUSTIC EQ DIALOG ENHANCEMENT MULTI CH IN SIGNAL
SELECT EXTENDED MODE SPEAKERS MIDNIGHT/ LOUDNESS
MULTI JOG MULTI JOG
VSX_52TX.book.fm 59 ページ ２００４年５月１４日 金曜日 午前９時２１分