Using the sr+ mode with a pioneer plasma display, Other connections 10 – Pioneer VSX-52TX User Manual

Page 61

Advertising

Other connections

•

Use a 3-ringed miniplug SR+ cable to connect the

CONTROL IN jack of this receiver with the CONTROL
OUT jack of your plasma display.

Before you can use the extra SR+ features, you need to
make a few settings in the receiver. See

SR+ Setup for

Pioneer plasma displays

on page 66 for detailed

instructions.

To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.

Note

• The 3-ringed SR+ cable from Pioneer is commer-

cially available under the part number ADE7095.
Contact the Pioneer Customer Support division for
more information on obtaining an SR+ cable (you
can also use a commercially available 3-ringed mini
phone plug for the connection).

Using the SR+ mode with a Pioneer
plasma display

When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:

• On-screen displays when making receiver settings,

such as speaker setup, MCACC setup, and so on.

• On-screen volume display.

• On-screen display of listening mode.

• Automatic video input switching on the plasma

display.

• Automatic volume muting on the plasma display.