Panasonic KX-T206E - Manual (Page 15)

15
Installation of Optional Card and Unit
Doorphone (KX-T30865) Connection
2-conductor wiring cord
KX-T30865
Notes
• The doorphone adaptor is not required for KX-T206.
• To avoid howling, you must assign all extensions as “DISABLE” in the “#06/#76 Doorphone
Assignment (Day/Night)” program when you do not connect a doorphone.
• If howling occurs while using the doorphone feature, check the wiring.
• You can use cable holders to fix the wires.
Door Opener Connection
A user-supplied door opener can be connected to the system.
GROUND
EXTN.
5
EXTN.
3
EXTN. 1
CO 2
CO 1
EXTN.
6
EXTN.
4
EXTN. 2
DPH
DOOR
OPENER
SYSTEM
3. Wind and fix the cables of the door opener
round the upper cable holder.
1. Loosen the screws. 2. Insert the wires coming from the door
opener into holes and tighten the screws.
DOOR
OPENER
Notes
• For wiring, it is recommended to use UL1015 twisted wire or the equivalent.
• The wire should be between 1.2 and 2.4 mm in diameter including the coating.
GROUND
SYSTEM
EXTN. 5
EXTN.
3
EXTN.
1
CO 2
CO 1
EXTN. 6
EXTN.
4
EXTN.
2
DPH
B
A
Panasonic Panasonic
DPH
DOOR
OPENER
D=1.2–2.4 mm
GROUND
EXTN. 5
EXTN.
3
EXTN. 1
CO 2
CO 1
EXTN. 6
EXTN.
4
EXTN. 2
DPH
DOOR OPENER
SYSTEM
To the door opener
• Set the door opener paired with the doorphone.