General programming instructions, Off-hook – Panasonic KX-T206E User Manual
Page 20
20
General Programming Instructions
Default Setting
This system has a default factory setting. If any of the program-
ming needs to be changed, you can change the setting by system
programming.
Required Telephone Set
You can use any of the following telephones for system program-
ming:
• Proprietary Telephone (PT): KX-T7130, KX-T7020, KX-T7050
• Single Line Telephone (SLT): tone type
All telephones (except KX-T7130) do not have display panels, so
you cannot check the setting you have made. Therefore, please use
KX-T7130 to check the programming.
Extensions Used for
System programming can only be performed from extension 21.
Programming
To Check the
Use KX-T7130. When you check the assignment, set the
Programmed Data
MEMORY switch on PT to “PROGRAM”.
Enter “#” and the program address.
You cannot check programs #60, #62, #63, #65, #67, #84 and #85,
as they are not displayed on the display panel.
Before Programming
To enter the system programming mode:
After Programming
To exit the system programming mode:
6
6
2
0
2
0
[Off-hook]
6
6
2
0
[Off-hook]
6