Peavey X-Four - Manual (Page 13)

p. 13
mono input module
aux send features
Six auxiliary AUX SENDS are available for creating individual output mixes.
These mixes can be used for driving effects processors, providing monitor
mixes, creating broadcast or alternate sound reinforcement mixes, or
other special requirements.
aux sends 1–6
These knobs adjust the amount of signal sent to the AUX buses.
Unity gain occurs at the zero setting. AUX 6 and 8 controls pan function
when selected for stereo operation.
aux 1–4, 5/6 pre-fader—PRE
The default signal source for the AUX SENDS is post-fader.These switches
are used for selecting the pre-fader signal for their respective auxes.The
pre-fader signal is derived post-mute and post-eq.
see—internal jumper options
AUX SENDS are post-eq, post-mute, and post-fader.
AUX SENDS are post-eq, post-mute, and pre-fader.
aux stereo 5/6
The default configuration for AUX 5 , and 6 , are mono, as with AUX 1–4 .
In situations where stereo-aux signals are required (such as driving stereo
in-ear monitors or effects processors), this switch reconfigures the
AUX
SENDS to operate in stereo by changing the functions of the potentiometers.
AUXES are configured as individual mono sends.
AUXES are configured as level and pan for stereo operation.
1