Peavey X-Four - Manual (Page 61)

p. 61
master module
matrix features
The X-Four includes two MATRIX mixes.Each of these outputs can be made
up of signals from the four GROUPS , left, right, mono and an external source.
left, right, and mono levels— MATRIX 1–2
These level controls are used to mix the left, right, and mono signals
into the corresponding MATRIX .
post-fader—left, right, and mono
These three post-fader switches determine whether the left, right and
mono
MASTER faders have any effect on signals that available to MATRIX 1–2 .
post-left, post-right, post-mono
The left, right and/or mono fader settings have no effect on the LEFT -,
RIGHT - and/or MONO - TO - MATRIX 1–2 level controls.
The left, right and/or mono faders are introduced into the signal
paths.
external input levels— MATRIX 1–2
These level controls are used to mix the external MATRIX input signals
into the corresponding matrix.The external MATRIX input connectors are
located on the rear-panel of the MASTER module.
5