Peavey X-Four - Manual (Page 75)

p. 75
master module
talkback features
The TALKBACK system provides facilities for assigning an external signal
(usually the console operator's microphone) to any of the console's out-
puts.Other signals can be routed through the
TALKBACK system include the
tone oscillator or the built in PINK NOISE generator.
talkback level
This control sets the level that appears at any of the outputs with
their respective TALK TO switches engaged. It also governs the audio level
at the TALKBACK output XLR connector on the rear panel.
pink noise
The TALKBACK in-connector is disabled and PINK NOISE is sent though
the TALKBACK system.
talkback on —TALK ON
This switch must be activated for the TALKBACK system to operate.
There are two-ways to activate it:
1 Momentary - Depressing the button for more-than 1/2 of a second will
cause it to act as a momentary switch.When the button is released, the
TALKBACK section will be shut-off.
2 Toggle - A quick tap on the button (less-than 1/2 second) will cause the
switch to electronically change its state from on-to-off or from off-to-on.
5