Planar Dome E4c - Manual (Page 20)

12 | Dome E4c Display
To install Dome CXtra
Bundled with the display system, the Dome CXtra software enhances
the functionality of the Dome E4c display with a range of value-added
services, such as DICOM calibration, error reporting, and backlight
saver. Network management of Dome displays running the Dome
CXtra software require the Enterprise Management Service for
Dome CXtra. For more information and instructions on installation,
refer to Dome CXtra User’s Guide.
To conserve energy use
You have two ways to lower energy usage when the display is idle:
• Dome CXtra Backlight Saver service (preferred)
• Screen Saver (set via Windows operating system)
Activate the power saver when you anticipate periods of inactivity,
such as at the end of the work day or work week. Once activated,
Backlight Saver (or Screen Saver) automatically turns the backlight off
during the period of inactivity. Backlight Saver and Screen Saver both
extend the life of the backlight and reduce the burn-in of images.
Do not use the Backlight Saver and Screen Saver concurrently.
To remove the driver
1 Close all applications that are running.
2 Navigate to the Control Panel. Select Add/Remove Programs.
3 Select your current display drivers. Select Add/Remove. Follow
the wizard to remove your current display drivers.
4 Restart your system.
mx4.book Page 12 Wednesday, August 9, 2006 3:03 PM