Planet Technology SGSW-2402 - Manual (Page 27)

23
Figure 3-16 Aging Control screen
Aging Control Configuration Procedures
Step 1: Select “Enable” from the Aging Control option.
Step 2: Enter an integer in the entry, choosing from the range of 1 to 128, if the aging control is enabled.
If the aging control is disabled, this step can be skipped.
3.15 Address Search
Host Search is for searching a host by IP or MAC address on the whole switch, and getting the port
number to switch the host is connected. It is useful while configuring the VLAN. With this function, you can
easily detect the port at which a host is connected to and have an idea about which ports should be
included in a VLAN.