Planet Technology SGSW-2402 - Manual (Page 40)

36
The system will request you to reboot the switch.
Step 3: Click “Yes” button to restart the switch.
Step 4: Wait for about 60 seconds and the system will automatically return to the Login Web page,
prompting you to enter password again.
3.21.4 Clear and Reset
By clicking this option, you will restore the management switch to factory defaults. And you will have to
re-enter all the configuration information to your network.
To Clear or reset the setting,
Step 1: Click on “Clear and Reset” button. The system will prompt you to choose whether you really want
to reset the configuration data.
Step 2: Click “Yes” button to proceed and the system will automatically reset the IP address to factory
default, which is http://192.168.100.128