Planet Technology SGSW-2402 - Manual (Page 42)

38
3.23 Reboot Switch
Rebooting the management switch is required after changes are made in the configuration or setting.
Figure 3-24 The Reboot Switch page
Click “Yes” to reboot the switch. The system will prompt you to logon again after about 60 seconds to see
the effect.
3.24 Logout
With the web browser, logging out is as easy as ABC. By clicking “Logout” button, you will get a logout GUI
as shown below. If you need to access to the Web Page again, you just need to click “Logon” button. This
is true only if you have not changed the default factory settings for the IP address of your switch.
Alternatively, you can log in again into the web-based browser via
http://192.168.100.128 or the new IP
address, which you have assigned to the switch.