Pentax Optio X - Manual (Page 162)

160
8
Settin
g
s
7
Press the { button.
The alarm image options screen appears.
8
Use the four-way controller (45)
to choose the image to be
displayed when the alarm rings.
If the selected image has a voice memo
attached, the voice memo will sound as the
alarm.
9
Press the 4 button four times.
When the alarm is turned on, [Alarm was set] appears and the camera
turns off.
The alarm will ring for one minute and the
selected image will be displayed when the set
time is reached while the camera is turned off.
You can stop the alarm by pressing any button
on the camera while the alarm is ringing.
When the snooze function is enabled, the alarm
will ring again five minutes after it is stopped. It will
do this five times. To turn the alarm off, press the
3 button while holding down the 4 button
and the alarm will stop ringing repeatedly.
Turning the Alarm Off
The alarm will not ring when the set time is reached if the camera is
on or during interval shooting standby.
OK MENU
1 0 0 1 0 0 - 0 0 1 7 0 0 1 7 1 0 0 - 0 0 1 7
O K O K C a n c e l C a n c e l O K C a n c e l
MENU
1 4 1 4 : 2 5 : 2 5 1 4 : 2 5
+ + OK
S n o o z e O f f S n o o z e O f f S n o o z e O f f
0 9 / 2 5 / 2 0 0 4 0 9 / 2 5 / 2 0 0 4 0 9 / 2 5 / 2 0 0 4