Pentax Optio X - Manual (Page 94)

92
4
Tak
ing Pi
cture
s
Saving the Settings (Memory)
You can choose whether you want the set values to be saved when the
camera is turned off or returned to the defaults. The items that can be
saved or reset are listed below. If you select O (On), the settings will be
saved in the status they were in immediately before the camera was
turned off. If you select P (Off), the settings will be reset to the defaults
when the camera is turned off. The table below also shows whether the
Memory default setting for each item is On or Off. Items not listed here
will be saved in the selected settings when the camera is turned off.
Item Description
Default
Setting
Flash Mode
The flash mode set with the { button and four-way
controller (4) (1p.78)
O
Drive Mode
The drive mode set with the { button and four-way
controller (2) (1pp.64-72)
P
Focus Mode
The focus mode set with the { button and four-way
controller (5) (1p.75)
P
Zoom Position The zoom position set with the zoom lever (1p.61) P
MF Position
The manual focus position set with the { button and
four-way controller (5) (1p.76)
P
White Balance
The [White Balance] setting on the [A Rec. Mode]
menu (1p.82)
P
AE Metering
The [AE Metering] setting on the [A Rec. Mode]
menu (1p.86)
P
Sensitivity
The [Sensitivity] setting on the [A Rec. Mode] menu
(1p.87)
P
EV Compensation
The EV compensation value set with the four-way
controller (45) (1p.63)
P
Digital Zoom
The [Digital Zoom] setting on the [A Rec. Mode]
menu (1p.62)
O
DISPLAY
The LCD monitor information display mode set with
the OK button (1p.73, p.105)
P
File #
If a new SD Memory Card is inserted when On has
been selected, file numbers are assigned
sequentially.
O
Setting [MF] to O (On) sets [Zoom Position] to O (On) at the same
time.