Before you start 01, Checking what’s in the box, Installing the receiver – Pioneer VSX-41 User Manual

Page 6: Making cable connections, Loading the batteries, Operating range of remote control unit

Advertising
background image

Before you start

01

6

En

Checking what’s in the box

Please check that you've received the following
supplied accessories:

• AM loop antenna

• FM wire antenna

• Dry cell batteries x 2 (AA size IEC LR6)

• Remote control

• These operating instructions

Installing the receiver

Please note the following points:

• Do not place objects

directly on top of this
unit. This prevents
proper heat dispersal.

• When installing on a

rack, shelf, etc., be sure to leave more than
8 inches (20 cm.) of space above the
receiver.

Making cable connections

Make sure not to
bend the cables over
the top of this unit (as
shown in the
illustration). If this
happens, the magnetic
field produced by the
transformers in this unit may cause a
humming noise from the speakers.

Loading the batteries

Incorrect use of batteries may result in such
hazards as leakage and bursting. Observe the
following precautions:

• Never use new and old batteries together.

• Insert the plus and minus sides of the

batteries properly according to the marks
in the battery case.

• Batteries with the same shape may have

different voltages. Do not use different
batteries together.

• When disposing of used batteries, please

comply with governmental regulations or
environmental public instruction’s rules
that apply in your country or area.

Operating range of remote
control unit

The remote control may not work properly if:

• There are obstacles between the remote

control and the receiver's remote sensor.

• Direct sunlight or fluorescent light is

shining onto the remote sensor.

• The receiver is located near a device that is

emitting infrared rays.

• The receiver is operated simultaneously

with another infrared remote control unit.

Dry cell batteries x 2 (AA size IEC LR6)

30

30

23ft (7m)

Advertising