Planet Technology WSW-2401 - Manual (Page 18)

13
3.5-1-4 Password Configuration
Allow user to modify the password
Ø Select the <Edit>
Ø Old password: enter the old password
Ø New password : enter the new password
Ø Enter again: re-enter the new password again
Ø Press<Save>to save the configuration
3.5-2 Port configuration
In this function, user can setup every port status.
Ø Select <Edit>
Ø Use TAB /Backspace key to move between items
Ø State: The port can be set enable or disable mode. If the port status is in disable then this
port will not receive or transmit any packet.
Ø Negotiation: set the negotiation status of port. The port can be set auto or force mode.
Ø Speed/Duplex: set the port link speed and duplex mode
Ø FC: enable or disable flow control function (flow control for full duplex mode)
Ø BP: enable or disable back pressure function (back pressure for half duplex mode)
Ø Bandwidth In/Out: per port packet transmission rate control. Per level is 100Kbps.
Ø Priority: set port to high or low priority
Ø Security: enable or disable security function