Planet Technology WSW-2401 - Manual (Page 26)

21
3.6-1-1 STP setup
Provide enable or disable STP function
Ø Select<Edit>
Ø Use <Space> key to choice option
Ø After complete press<Save> to save the configuration
3.6-1-2 System Configuration
In this function allow modifying the STP system configuration
Ø Select<Edit> to modify Spanning Tree Parameters
Ø After modify complete Press ESC goes back to action menu
Ø Press<Save> to save the configuration
3.6-1-3 Per Port Setting
In this function allow edit per port STP configuration.
Ø Select<Edit> to modify the path cost and priority of each port
Ø After modify complete press ESC goes back to action menu
Ø Press<Save> to save the configuration