Planet Technology WSW-2401 - Manual (Page 29)

24
3.6-3-1 Working Ports
In this function allow to set LACP port state activity of each port
Ø Select<Edit>
Ø Press Space key to enable or disable LACP support
Ø After complete setup press ESC goes back to action menu
Ø Press<Save> to save the configuration
3.6-3-2 State Activity
In this function allow to set LACP port state activity
Ø Select<Edit>
Ø Press Space key to choice Active or Passive
Ø After complete setup press ESC goes back to action menu
Ø Press<Save> to save the configuration