Panasonic BT-H1700BP - Manual (Page 11)

11
BASIC MENU OPERATIONS
(MAIN MENU, SET-UP MENU)
Ⅵ ABOUT MENU SCREENS
This monitor features a MAIN MENU (main menu screen) and a SET-UP MENU (setup menu screen).
The MAIN MENU contains the functions normally used, and the SET-UP MENU contains the settings required for initial setup.
“MAIN MENU”
Items Functions Displays
1 APERTURE CONTROL Compensates the frequency characteristics of the input video signal. *1
2 SLOT CONDITION Displays the status of the input cards installed in each of the input card slots.
3 sub menu POSI. Selects the display position of the sub menu superimposed on the screen.
4 AREA MARKER Controls ON/OFF and other settings of the MARKER SELECT, SAFETY MARKER,
and ZOOM functions included in the AREA MARKER function.
*2
5 COLOR MATRIX Selects or adjusts the picture color matrix. *1
About “Displays” *1 : Not displayed when an RGB signal is input.
*2 : Displayed only when the screen ratio is 16:9. Not displayed when an RGB signal is input.
When some items are not displayed depending on the input signals, subsequent items will move up.
Position of the menu varies depending on the type of signal.
“SET-UP MENU”
Items Functions
1 FUNCTION SETTING Selects the control systems for the COLOR SYSTEM, synchronized signal, RUSH DELAY TIME,
tally lamp colors, and MAKE/TRIGGER terminal.
* Checks the amount of time that the monitor has been used.
* Selects the audio channel group for the EMBEDDED AUDIO. (When an input card compliant with EMBEDDED AUDIO is installed.)
2 PICTURE SUB ADJ. Controls the approximate adjustment of the video control level when the video adjustment knob is
adjusted to the center.
* Can also be used to switch the NTSC set-up level, and change the component signal’s input level settings.
3 COLOR TEMP./BAL. Sets or adjusts the color temperature or white balance.
4 SIZE/POSI. ADJ. Adjusts the size or position of the picture.
5 DISTORTION ADJ. Compensates the picture distortion.
6 STATUS DISPLAY Sets the status display ON/OFF.
* Switches the display on and off. Also selects the type of display.
7 CONTROL LOCK Sets the control lock preventing the monitor from misuse.
8 all reset Sets all items in SET-UP MENU to factory-preset values.
Ⅵ BUTTONS FOR MENU OPERATIONS
VOLUME
SLOT 1
A B
DEGAUSS
MENU
MUTING
SCREENS CHECK ASPECT AREA MARKER
UNDER SCAN PULSE CROSS COLOR OFF SLOT 2
C D
SLOT 3 POWER
E F INPUT SELECT
VOLUME
DEGAUSS
MENU
MUTING
MENU
LCT1464-001A_EN_10-15-6 03.9.19, 14:45 11