Panasonic BT-H1700BP - Manual (Page 18)

18
HOW TO USE “SET-UP MENU”
(cont’d)
COLOR TEMP./BAL.
Sets or adjusts the color temperature or white
balance.
Press the button to
display the setting menu
illustrated on the right.
• Use the five items indicated with
mark to make fine adjustments
between the monitors.
7
COLOR TEMP.
Selects the color temperature.
HIGH : Sets the color temperature to 9300.
LOW : Sets the color temperature to 6500.
7
BLUE DRIVE
Adjusts the blue drive level.
• MIN ~ 000 ~ MAX (in 127 grades)
7
RED DRIVE
Adjusts the red drive level.
• MIN ~ 000 ~ MAX (in 127 grades)
7
GREEN CUTOFF
Sets the green cut-off point.
• MIN ~ MAX (in 205 grades)
7
BLUE CUTOFF
Sets the blue cut-off point.
• MIN ~ MAX (in 205 grades)
7
RED CUTOFF
Sets the red cut-off point.
• MIN ~ MAX (in 205 grades)
PICTURE SUB ADJ.
Controls the approximate adjustment of the video
control level when the video adjustment knob is
adjusted to the center.
• Can also be used to switch the NTSC set-up level, and
change the component signal’s input level settings.
Press the button to
display the setting menu
illustrated on the right.
NOTE:
When the RGB signal is input, only
CONTRAST and BRIGHT are
displayed. When the PAL signal is
input, only CONTRAST, BRIGHT and CHROMA are displayed.
7
CONTRAST
• –20 ~ 00 ~ +20
7
BRIGHT
• –20 ~ 00 ~ +20
7
CHROMA
• –20 ~ 00 ~ +20
7
PHASE
• –20 ~ 00 ~ +20
7
NTSC SETUP
Sets the set-up level of the input NTSC signal.
00 : Compliant with 0% set-up signal.
7.5 : Compliant with 7.5% set-up signal.
NOTE:
NTSC SETUP is displayed only when the video input card is
installed and an NTSC signal is input.
7
COMPO. LEVEL
Sets the set-up level of the input component signal.
SMPTE : Compliant with M2VTR signals.
B75
: Compliant with Betacam 7.5% set-up signal.
B00 : Compliant with Betacam 0% set-up signal.
NOTE:
COMPO. LEVEL is displayed only when a 480/60i, 480/60p, 576/
50i or 576/50p signal is input.
<PICTURE SUB ADJ.>
CONTRAST : 00
BRIGHT : 00
CHROMA : 00
PHASE : 00
NTSC SETUP : 00
COMPO.LEVEL :SMPTE
sub menu
reset
EXIT: MENU ADJUST: – + SELECT:
<COLOR TEMP./BAL.>
COLOR TEMP. : LOW
BLUE DRIVE : 000
RED DRIVE : 000
GREEN CUTOFF : MIN
BLUE CUTOFF : MIN
RED CUTOFF : MIN
sub menu
reset
EXIT: MENU ADJUST: – + SELECT:
LCT1464-001A_EN_16-21-B 03.9.19, 14:46 18