Controls and features (input card: optional), Controls and features, Video input card (bt-ya701p) – Panasonic BT-H1700BP User Manual
Page 7: Component/rgb input card (bt-ya702p), Input card: optional), Component/rgb signal input/output terminals, Synchronized signal input/output terminals, Audio input/output terminals, Connection terminal, S-video signal input terminal (only for video 2)
7
Ⅵ Compatible signal formats:
480/60i, 576/50i, 576/50p, 480/60p, 720/50p,
720/60p, 1035/60i, 1080/50i, 1080/60i,
1080/24psF
2
3
4
1
2
3
4
CONTROLS AND FEATURES
(INPUT CARD: OPTIONAL)
7
VIDEO INPUT CARD (BT-YA701P)
5
1
7
COMPONENT/RGB INPUT CARD (BT-YA702P)
Component/RGB signal input/output terminals
Input (IN) and output (OUT) terminals for component (color difference) or
RGB signals.
Select component signal : INPUT SELECT A (SLOT1)/C (SLOT2)/E (SLOT3)
Select RGB signal
: INPUT SELECT B (SLOT1)/D (SLOT2)/F (SLOT3)
* The IN and OUT terminals are bridge-connected (auto termination).
Synchronized signal input/output terminals
Input (IN) and output (OUT) terminals for the vertical, horizontal or complex
synchronized signals.
• To use these terminals, set “SYNC SELECT” to “EXT.”
Refer to “SYNC SELECT” on page 17 for more information.
Audio input/output terminals
Input (IN) and output (OUT) terminals for the analog audio signals.
• The IN and OUT terminals are bridge-connected.
Connection terminal
Attach to the connection terminal of your Multi-Format Monitor.
7
Compatible signal formats:
NTSC (3.58 MHz), PAL (4.43 MHz), black-
and-white (50 Hz/60 Hz)
VIDEO 1
OUT
IN
AUDIO 2
AUDIO 1
OUT
IN
VIDEO 2
OUT
Y/C IN
IN
OUT
IN
EXT.SYNC
1
2
3
4
5
Composite signal input/output terminals (VIDEO 1, VIDEO 2)
Input (IN) and output (OUT) terminals for the composite video signals of
the NTSC, PAL, and black/white (50 Hz/60 Hz).
NTSC and PAL are switched in the “COLOR SYSTEM”. Refer to “COLOR
SYSTEM” on page 17.
Select VIDEO 1: press INPUT SELECT A (SLOT1)/C (SLOT2)/E (SLOT3) buttons.
Select VIDEO 2: press INPUT SELECT B (SLOT1)/D (SLOT2)/F (SLOT3) buttons.
* The IN and OUT terminals are bridge-connected (auto termination).
S-video signal input terminal (only for VIDEO 2)
Input terminal for the S-video signal.
• When an S-video signal is input to this terminal and a video signal is input to
VIDEO 2, the S-video signal has priority over the video signal.
Synchronized signal input/output terminals (for both
VIDEO 1 and VIDEO 2)
Input (IN) and output (OUT) terminals for the complex synchronized signals.
To use these terminals, set “SYNC SELECT” to “EXT.” Refer to “SYNC
SELECT” on page 17 for more information.
NOTES:
• When an external synchronized signal is input, external synchronization is
prioritized for both VIDEO 1 and VIDEO 2.
• External synchronization does not function when a video signal (except black burst
signal) is included in the complex synchronized signal.
Audio signal input/output terminals (for both VIDEO 1
and VIDEO 2)
Input (IN) and output (OUT) terminals for analog audio signals
corresponding to VIDEO 1 and VIDEO 2.
• The IN and OUT terminals are bridge-connected.
Connection terminal
Attach to the connection terminal of your Multi-Format Monitor.
B/P
B
/B-Y
G / Y
OUT
IN
OUT
IN
R/P
R
/R-Y
OUT
IN
VD
OUT
IN
HD/C
S
OUT
IN
OUT
IN
AUDIO
OUT
IN
1
2
3
4
LCT1464-001A_EN_02-09-6
03.9.19, 14:45
7