Peavey X-Monitor - Manual (Page 65)

Changing and reviewing the utility changes
The Utility settings can be accessed by entering Utility Mode. Once there, the different para-
meters can be changed to suit user’s preferences. The changes stay in effect until they are
again modified by the user, or a System Reset is performed (detailed later) which changes
them all back to their default settings.
Utility Mode:
1) Enter Utility Mode: Press the Micro Utility button (F), it is a latching switch,
and the system will stay in Utility Mode while this button is depressed. The Display
(B) now shows the first Parameter - " uP " of the Parameter List.
2) Select a Parameter to edit: Use the Up/Down keys (A) to scroll thru the list
of available Parameters.
3) View the current Setting: Press the GO (I) button. The Display will change
from showing the Parameter to showing the Parameters current setting.
4) Changing the setting: While the Display is showing Parameter Settings (not the
Parameter itself), the Up/Down keys will scroll thru the list of possible settings for
that Parameter. Use the keys to select the new setting and press the GO button
again.The Display will briefly show " **** ", the displayed setting will be activated and
the Display will go back to showing the Parameter. Note: The only way to get back
to showing the Parameter is to press the GO button, so even if no change is desired,
the GO button must be pressed. Make sure the display is showing the desired
setting when you press GO. You are now back at Step 2, and can continue to
select and change Parameters.
5) Exit Utility Mode: Once you’re done, press and release the Micro Utility (F) key,
the Mute System returns to Normal Mode with the new settings in place.
p. 65
Microprocessor control 1