Planet Technology DVR-1670 - Manual (Page 43)

Chapter 3.4). The camera name can support 32 characters.
Step 3 Press ENTER key to exit edit status.
Move “Active Frame” to “Confirm” button, press ENTER to save the modification and you
can see the new camera name. Press “Cancel” button or ESC key to abort.
Setup Camera Name Position
If you do not want to display camera name, just disable the check box beside camer name
edit box. The disable flag is “ ”. If you enable the check box, you can setup the camera
name position. You can copy the position to any other camera. The setup stpes are
Step 1
Enter into “Image Setup” menu.
Step 2
Select one camera.
Step 3
Enable the check box on the right side of camer name, then you move “Active
Frame” to “Position” button, press ENTER to enter into camera name position
setup interface, in that interface, you can use И
З Ж Е keys to move
camera name position. When the position is fixed, press ENTER and return
“Image Setup” menu, and press “Confirm” button to save it. In the “Image Setup”
menu, perss “Cancel” button or ESC key, you can abort the modification.
Page 43